haiku.git

/*
 * Copyright 2011-2015, Haiku, Inc. All Rights Reserved.
 * Distributed under the terms of the MIT License.
 *
 * Authors:
 *		Michael Lotz, mmlr@mlotz.ch
 *		Alexander von Gluck IV, kallisti5@unixzen.com
 */
#include "Pipes.h"

#include "accelerant.h"
#include "accelerant_protos.h"
#include "intel_extreme.h"

#include <stdlib.h>
#include <string.h>

#include <new>


#undef TRACE
#define TRACE_PIPE
#ifdef TRACE_PIPE
#	define TRACE(x...) _sPrintf("intel_extreme: " x)
#else
#	define TRACE(x...) ;
#endif

#define ERROR(x...) _sPrintf("intel_extreme: " x)
#define CALLED(x...) TRACE("CALLED %s\n", __PRETTY_FUNCTION__)


// PIPE: 6
// PLANE: 7


void
program_pipe_color_modes(uint32 colorMode)
{
	// All pipes get the same color mode
	if (gInfo->shared_info->device_type.InFamily(INTEL_FAMILY_LAKE)) {
		write32(INTEL_DISPLAY_A_CONTROL, (read32(INTEL_DISPLAY_A_CONTROL)
			& ~(DISPLAY_CONTROL_COLOR_MASK_SKY | DISPLAY_CONTROL_GAMMA))
			| colorMode);
		write32(INTEL_DISPLAY_B_CONTROL, (read32(INTEL_DISPLAY_B_CONTROL)
			& ~(DISPLAY_CONTROL_COLOR_MASK_SKY | DISPLAY_CONTROL_GAMMA))
			| colorMode);
	} else {
		write32(INTEL_DISPLAY_A_CONTROL, (read32(INTEL_DISPLAY_A_CONTROL)
			& ~(DISPLAY_CONTROL_COLOR_MASK | DISPLAY_CONTROL_GAMMA))
			| colorMode);
		write32(INTEL_DISPLAY_B_CONTROL, (read32(INTEL_DISPLAY_B_CONTROL)
			& ~(DISPLAY_CONTROL_COLOR_MASK | DISPLAY_CONTROL_GAMMA))
			| colorMode);
	}
}


// #pragma mark - Pipe


Pipe::Pipe(pipe_index pipeIndex)
	:
	fHasTranscoder(false),
	fFDILink(NULL),
	fPanelFitter(NULL),
	fPipeIndex(pipeIndex),
	fPipeOffset(0),
	fPlaneOffset(0)
{
	switch (pipeIndex) {
		case INTEL_PIPE_B:
			TRACE("Pipe B.\n");
			fPipeOffset = 0x1000;
			fPlaneOffset = INTEL_PLANE_OFFSET;
			break;
		case INTEL_PIPE_C:
			TRACE("Pipe C.\n");
			fPipeOffset = 0x2000;
			fPlaneOffset = INTEL_PLANE_OFFSET * 2;
			break;
		case INTEL_PIPE_D:
			TRACE("Pipe D.\n");
			fPipeOffset = 0xf000;
			//no fPlaneOffset..
			break;
		default:
			TRACE("Pipe A.\n");
			break;
	}

	// IvyBridge: Analog + Digital Ports behind FDI (on northbridge)
	// Haswell: Only VGA behind FDI (on northbridge)
	// SkyLake: FDI gone. No more northbridge video.
	if ((gInfo->shared_info->pch_info != INTEL_PCH_NONE) &&
		(gInfo->shared_info->device_type.Generation() <= 8)) {
		TRACE("%s: Pipe is routed through FDI\n", __func__);

		// Program FDILink if PCH
		fFDILink = new(std::nothrow) FDILink(pipeIndex);
	}
	if (gInfo->shared_info->pch_info != INTEL_PCH_NONE) {
		// DDI also has transcoders
		fHasTranscoder = true;
		// Program gen5(+) style panelfitter as well (DDI has this as well..)
		fPanelFitter = new(std::nothrow) PanelFitter(pipeIndex);
	}

	TRACE("Pipe Base: 0x%" B_PRIxADDR " Plane Base: 0x%" B_PRIxADDR "\n",
			fPipeOffset, fPlaneOffset);
}


Pipe::~Pipe()
{
}


bool
Pipe::IsEnabled()
{
	CALLED();

	return (read32(INTEL_DISPLAY_A_PIPE_CONTROL + fPipeOffset)
		& INTEL_PIPE_ENABLED) != 0;
}


void
Pipe::Configure(display_mode* mode)
{
	uint32 pipeControl = read32(INTEL_DISPLAY_A_PIPE_CONTROL + fPipeOffset);

	// TODO: Haswell+ dithering changes.
	//if (gInfo->shared_info->device_type.Generation() >= 4) {
	//	pipeControl |= (INTEL_PIPE_DITHER_EN | INTEL_PIPE_DITHER_TYPE_SP);

	//Link bit depth: this should be globally known per FDI link (i.e. laptop panel 3x6, rest 3x8)
	//currently using BIOS preconfigured setup
	//pipeControl = (pipeControl & ~INTEL_PIPE_BPC_MASK) | INTEL_PIPE_BPC(INTEL_PIPE_8BPC);

	// TODO: CxSR downclocking?

	// TODO: Interlaced modes
	pipeControl = (pipeControl & ~(0x7 << 21)) | INTEL_PIPE_PROGRESSIVE;

	write32(INTEL_DISPLAY_A_PIPE_CONTROL + fPipeOffset, pipeControl);
	read32(INTEL_DISPLAY_A_PIPE_CONTROL + fPipeOffset);

	if (gInfo->shared_info->device_type.Generation() >= 6) {
		// According to SandyBridge modesetting sequence, pipe must be enabled
		// before PLL are configured.
		addr_t pipeReg = INTEL_DISPLAY_A_PIPE_CONTROL + fPipeOffset;
		write32(pipeReg, read32(pipeReg) | INTEL_PIPE_ENABLED);
	}
}


void
Pipe::_ConfigureTranscoder(display_mode* target)
{
	CALLED();

	TRACE("%s: fPipeOffset: 0x%" B_PRIxADDR"\n", __func__, fPipeOffset);

	if (gInfo->shared_info->device_type.Generation() < 9) {
		// update timing (fPipeOffset bumps the DISPLAY_A to B when needed)
		write32(INTEL_TRANSCODER_A_HTOTAL + fPipeOffset,
			((uint32)(target->timing.h_total - 1) << 16)
			| ((uint32)target->timing.h_display - 1));
		write32(INTEL_TRANSCODER_A_HBLANK + fPipeOffset,
			((uint32)(target->timing.h_total - 1) << 16)
			| ((uint32)target->timing.h_display - 1));
		write32(INTEL_TRANSCODER_A_HSYNC + fPipeOffset,
			((uint32)(target->timing.h_sync_end - 1) << 16)
			| ((uint32)target->timing.h_sync_start - 1));

		write32(INTEL_TRANSCODER_A_VTOTAL + fPipeOffset,
			((uint32)(target->timing.v_total - 1) << 16)
			| ((uint32)target->timing.v_display - 1));
		write32(INTEL_TRANSCODER_A_VBLANK + fPipeOffset,
			((uint32)(target->timing.v_total - 1) << 16)
			| ((uint32)target->timing.v_display - 1));
		write32(INTEL_TRANSCODER_A_VSYNC + fPipeOffset,
			((uint32)(target->timing.v_sync_end - 1) << 16)
			| ((uint32)target->timing.v_sync_start - 1));

		#if 0
		// XXX: Is it ok to do these on non-digital?
		write32(INTEL_TRANSCODER_A_POS + fPipeOffset, 0);
		write32(INTEL_TRANSCODER_A_IMAGE_SIZE + fPipeOffset,
			((uint32)(target->timing.h_display - 1) << 16)
				| ((uint32)target->timing.v_display - 1));
		#endif
	} else {
		// on Skylake and later, timing is already done in ConfigureTimings()
	}
}


uint32
Pipe::TranscoderMode()
{
	if (gInfo->shared_info->device_type.Generation() < 9) {
		ERROR("%s: Don't know how to get transcoder mode on older generations\n", __func__);
		return 0;
	}

	TRACE("%s: trans conf reg: 0x%" B_PRIx32 "\n", __func__,
		read32(DDI_SKL_TRANS_CONF_A + fPipeOffset));
	TRACE("%s: trans DDI func ctl reg: 0x%" B_PRIx32 "\n", __func__,
		read32(PIPE_DDI_FUNC_CTL_A + fPipeOffset));
	uint32 value = (read32(PIPE_DDI_FUNC_CTL_A + fPipeOffset) & PIPE_DDI_MODESEL_MASK)
		>> PIPE_DDI_MODESEL_SHIFT;
	switch (value) {
		case PIPE_DDI_MODE_DVI:
			TRACE("%s: Transcoder uses DVI mode\n", __func__);
			break;
		case PIPE_DDI_MODE_DP_SST:
			TRACE("%s: Transcoder uses DP SST mode\n", __func__);
			break;
		case PIPE_DDI_MODE_DP_MST:
			TRACE("%s: Transcoder uses DP MST mode\n", __func__);
			break;
		default:
			TRACE("%s: Transcoder uses HDMI mode\n", __func__);
			break;
	}
	return value;
}


status_t
Pipe::SetFDILink(const display_timing& timing, uint32 linkBandwidth, uint32 lanes, uint32 bitsPerPixel)
{
	TRACE("%s: fPipeOffset: 0x%" B_PRIxADDR "\n", __func__, fPipeOffset);
	TRACE("%s: FDI/PIPE link reference clock is %gMhz\n", __func__, linkBandwidth / 1000.0f);
	TRACE("%s: FDI/PIPE M1 data before: 0x%" B_PRIx32 "\n", __func__, read32(PCH_FDI_PIPE_A_DATA_M1 + fPipeOffset));
	TRACE("%s: FDI/PIPE N1 data before: 0x%" B_PRIx32 "\n", __func__, read32(PCH_FDI_PIPE_A_DATA_N1 + fPipeOffset));
	TRACE("%s: FDI/PIPE M1 link before: 0x%" B_PRIx32 "\n", __func__, read32(PCH_FDI_PIPE_A_LINK_M1 + fPipeOffset));
	TRACE("%s: FDI/PIPE N1 link before: 0x%" B_PRIx32 "\n", __func__, read32(PCH_FDI_PIPE_A_LINK_N1 + fPipeOffset));

	if ((bitsPerPixel < 18) || (bitsPerPixel > 36)) {
		ERROR("%s: FDI/PIPE illegal colordepth set.\n", __func__);
		return B_ERROR;
	}
	TRACE("%s: FDI/PIPE link colordepth: %" B_PRIu32 "\n", __func__, bitsPerPixel);

	if (lanes > 4) {
		ERROR("%s: FDI/PIPE illegal number of lanes set.\n", __func__);
		return B_ERROR;
	}
	TRACE("%s: FDI/PIPE link with %" B_PRIx32 " lane(s) in use\n", __func__, lanes);

	//Setup Data M/N
	uint64 linkspeed = lanes * linkBandwidth * 8;
	uint64 ret_n = 1;
	while(ret_n < linkspeed) {
		ret_n *= 2;
	}
	if (ret_n > 0x800000) {
		ret_n = 0x800000;
	}
	uint64 ret_m = timing.pixel_clock * ret_n * bitsPerPixel / linkspeed;
	while ((ret_n > 0xffffff) || (ret_m > 0xffffff)) {
		ret_m >>= 1;
		ret_n >>= 1;
	}
	//Set TU size bits (to default, max) before link training so that error detection works
	write32(PCH_FDI_PIPE_A_DATA_M1 + fPipeOffset, ret_m | FDI_PIPE_MN_TU_SIZE_MASK);
	write32(PCH_FDI_PIPE_A_DATA_N1 + fPipeOffset, ret_n);

	//Setup Link M/N
	linkspeed = linkBandwidth;
	ret_n = 1;
	while(ret_n < linkspeed) {
		ret_n *= 2;
	}
	if (ret_n > 0x800000) {
		ret_n = 0x800000;
	}
	ret_m = timing.pixel_clock * ret_n / linkspeed;
	while ((ret_n > 0xffffff) || (ret_m > 0xffffff)) {
		ret_m >>= 1;
		ret_n >>= 1;
	}
	write32(PCH_FDI_PIPE_A_LINK_M1 + fPipeOffset, ret_m);
	//Writing Link N triggers all four registers to be activated also (on next VBlank)
	write32(PCH_FDI_PIPE_A_LINK_N1 + fPipeOffset, ret_n);

	TRACE("%s: FDI/PIPE M1 data after: 0x%" B_PRIx32 "\n", __func__, read32(PCH_FDI_PIPE_A_DATA_M1 + fPipeOffset));
	TRACE("%s: FDI/PIPE N1 data after: 0x%" B_PRIx32 "\n", __func__, read32(PCH_FDI_PIPE_A_DATA_N1 + fPipeOffset));
	TRACE("%s: FDI/PIPE M1 link after: 0x%" B_PRIx32 "\n", __func__, read32(PCH_FDI_PIPE_A_LINK_M1 + fPipeOffset));
	TRACE("%s: FDI/PIPE N1 link after: 0x%" B_PRIx32 "\n", __func__, read32(PCH_FDI_PIPE_A_LINK_N1 + fPipeOffset));

	return B_OK;
}


void
Pipe::ConfigureScalePos(display_mode* target)
{
	CALLED();

	TRACE("%s: fPipeOffset: 0x%" B_PRIxADDR "\n", __func__, fPipeOffset);

	if (target == NULL) {
		ERROR("%s: Invalid display mode!\n", __func__);
		return;
	}

	if (gInfo->shared_info->device_type.Generation() < 6) {
		// FIXME check on which generations this register exists
		// (it appears it would be available only for cursor planes, not
		// display planes)
		// Since we set the plane to be the same size as the display, we can
		// just show it starting at top-left.
		write32(INTEL_DISPLAY_A_POS + fPipeOffset, 0);
	}

	// The only thing that really matters: set the image size and let the
	// panel fitter or the transcoder worry about the rest
	write32(INTEL_DISPLAY_A_PIPE_SIZE + fPipeOffset,
		((uint32)(target->timing.h_display - 1) << 16)
			| ((uint32)target->timing.v_display - 1));

	// Set the plane size as well while we're at it (this is independant, we
	// could have a larger plane and scroll through it).
	if ((gInfo->shared_info->device_type.Generation() <= 4)
		|| gInfo->shared_info->device_type.HasDDI()) {
		// This is "reserved" on G35 and GMA965, but needed on 945 (for which
		// there is no public documentation), and I assume earlier devices as
		// well.
		//
		// IMPORTANT WARNING: height and width are swapped when compared to the other registers!
		// Be careful when editing this code and don't accidentally swap them!
		write32(INTEL_DISPLAY_A_IMAGE_SIZE + fPipeOffset,
			((uint32)(target->timing.v_display - 1) << 16)
			| ((uint32)target->timing.h_display - 1));
	}
}


void
Pipe::ConfigureTimings(display_mode* target, bool hardware, port_index portIndex)
{
	CALLED();

	TRACE("%s(%d): fPipeOffset: 0x%" B_PRIxADDR"\n", __func__, hardware,
		fPipeOffset);

	if (target == NULL) {
		ERROR("%s: Invalid display mode!\n", __func__);
		return;
	}

	/* If using the transcoder, leave the display at its native resolution,
	 * and configure only the transcoder (panel fitting will match them
	 * together). */
	if (!fHasTranscoder || hardware)
	{
		// update timing (fPipeOffset bumps the DISPLAY_A to B when needed)
		// Note: on Skylake below registers are part of the transcoder
		write32(INTEL_DISPLAY_A_HTOTAL + fPipeOffset,
			((uint32)(target->timing.h_total - 1) << 16)
			| ((uint32)target->timing.h_display - 1));
		write32(INTEL_DISPLAY_A_HBLANK + fPipeOffset,
			((uint32)(target->timing.h_total - 1) << 16)
			| ((uint32)target->timing.h_display - 1));
		write32(INTEL_DISPLAY_A_HSYNC + fPipeOffset,
			((uint32)(target->timing.h_sync_end - 1) << 16)
			| ((uint32)target->timing.h_sync_start - 1));

		write32(INTEL_DISPLAY_A_VTOTAL + fPipeOffset,
			((uint32)(target->timing.v_total - 1) << 16)
			| ((uint32)target->timing.v_display - 1));
		write32(INTEL_DISPLAY_A_VBLANK + fPipeOffset,
			((uint32)(target->timing.v_total - 1) << 16)
			| ((uint32)target->timing.v_display - 1));
		write32(INTEL_DISPLAY_A_VSYNC + fPipeOffset,
			((uint32)(target->timing.v_sync_end - 1) << 16)
			| ((uint32)target->timing.v_sync_start - 1));
	}

	ConfigureScalePos(target);

	// transcoder is not applicable if eDP is targeted on Sandy- and IvyBridge
	if ((gInfo->shared_info->device_type.InGroup(INTEL_GROUP_SNB) ||
		 gInfo->shared_info->device_type.InGroup(INTEL_GROUP_IVB)) &&
		(portIndex == INTEL_PORT_A)) {
		return;
	}

	if (fHasTranscoder && hardware) {
		_ConfigureTranscoder(target);
	}
}


void
Pipe::ConfigureClocks(const pll_divisors& divisors, uint32 pixelClock,
	uint32 extraFlags)
{
	CALLED();

	addr_t pllDivisorA = INTEL_DISPLAY_A_PLL_DIVISOR_0;
	addr_t pllDivisorB = INTEL_DISPLAY_A_PLL_DIVISOR_1;
	addr_t pllControl = INTEL_DISPLAY_A_PLL;
	addr_t pllMD = INTEL_DISPLAY_A_PLL_MD;

	if (fPipeIndex == INTEL_PIPE_B) {
		pllDivisorA = INTEL_DISPLAY_B_PLL_DIVISOR_0;
		pllDivisorB = INTEL_DISPLAY_B_PLL_DIVISOR_1;
		pllControl = INTEL_DISPLAY_B_PLL;
		pllMD = INTEL_DISPLAY_B_PLL_MD;
	}

	// Disable DPLL first
	write32(pllControl, read32(pllControl) & ~DISPLAY_PLL_ENABLED);
	spin(150);

	float refFreq = gInfo->shared_info->pll_info.reference_frequency / 1000.0f;

	if (gInfo->shared_info->device_type.InGroup(INTEL_GROUP_96x)) {
		float adjusted = ((refFreq * divisors.m) / divisors.n) / divisors.p;
		uint32 pixelMultiply = uint32(adjusted / (pixelClock / 1000.0f));
		write32(pllMD, (0 << 24) | ((pixelMultiply - 1) << 8));
	}

	// XXX: For now we assume no LVDS downclocking and program the same divisor
	// value to both divisor 0 (standard) and 1 (reduced divisor)
	if (gInfo->shared_info->device_type.InGroup(INTEL_GROUP_PIN)) {
		write32(pllDivisorA, (((1 << divisors.n) << DISPLAY_PLL_N_DIVISOR_SHIFT)
				& DISPLAY_PLL_IGD_N_DIVISOR_MASK)
			| (((divisors.m2 - 2) << DISPLAY_PLL_M2_DIVISOR_SHIFT)
				& DISPLAY_PLL_IGD_M2_DIVISOR_MASK));
		write32(pllDivisorB, (((1 << divisors.n) << DISPLAY_PLL_N_DIVISOR_SHIFT)
				& DISPLAY_PLL_IGD_N_DIVISOR_MASK)
			| (((divisors.m2 - 2) << DISPLAY_PLL_M2_DIVISOR_SHIFT)
				& DISPLAY_PLL_IGD_M2_DIVISOR_MASK));
	} else {
		write32(pllDivisorA, (((divisors.n - 2) << DISPLAY_PLL_N_DIVISOR_SHIFT)
				& DISPLAY_PLL_N_DIVISOR_MASK)
			| (((divisors.m1 - 2) << DISPLAY_PLL_M1_DIVISOR_SHIFT)
				& DISPLAY_PLL_M1_DIVISOR_MASK)
			| (((divisors.m2 - 2) << DISPLAY_PLL_M2_DIVISOR_SHIFT)
				& DISPLAY_PLL_M2_DIVISOR_MASK));
		write32(pllDivisorB, (((divisors.n - 2) << DISPLAY_PLL_N_DIVISOR_SHIFT)
				& DISPLAY_PLL_N_DIVISOR_MASK)
			| (((divisors.m1 - 2) << DISPLAY_PLL_M1_DIVISOR_SHIFT)
				& DISPLAY_PLL_M1_DIVISOR_MASK)
			| (((divisors.m2 - 2) << DISPLAY_PLL_M2_DIVISOR_SHIFT)
				& DISPLAY_PLL_M2_DIVISOR_MASK));
	}

	//note: bit DISPLAY_PLL_NO_VGA_CONTROL does not exist on IvyBridge and should be left
	//      zero there. It does not influence it though.
	uint32 pll = DISPLAY_PLL_ENABLED | DISPLAY_PLL_NO_VGA_CONTROL | extraFlags;

	if (gInfo->shared_info->device_type.Generation() >= 3) {
		// p1 divisor << 1 , 1-8
		if (gInfo->shared_info->device_type.InGroup(INTEL_GROUP_PIN)) {
			pll |= ((1 << (divisors.p1 - 1))
					<< DISPLAY_PLL_IGD_POST1_DIVISOR_SHIFT)
				& DISPLAY_PLL_IGD_POST1_DIVISOR_MASK;
		} else {
			pll |= ((1 << (divisors.p1 - 1))
					<< DISPLAY_PLL_POST1_DIVISOR_SHIFT)
				& DISPLAY_PLL_9xx_POST1_DIVISOR_MASK;
		//	pll |= ((divisors.p1 - 1) << DISPLAY_PLL_POST1_DIVISOR_SHIFT)
		//		& DISPLAY_PLL_9xx_POST1_DIVISOR_MASK;
		}

		// Also configure the FP0 divisor on SandyBridge
		if (gInfo->shared_info->device_type.Generation() == 6) {
			pll |= ((1 << (divisors.p1 - 1))
					<< DISPLAY_PLL_SNB_FP0_POST1_DIVISOR_SHIFT)
				& DISPLAY_PLL_SNB_FP0_POST1_DIVISOR_MASK;
		}

		if (divisors.p2 == 5 || divisors.p2 == 7)
			pll |= DISPLAY_PLL_DIVIDE_HIGH;

		if (gInfo->shared_info->device_type.InGroup(INTEL_GROUP_96x))
			pll |= 6 << DISPLAY_PLL_PULSE_PHASE_SHIFT;
	} else {
		if (divisors.p2 != 5 && divisors.p2 != 7)
			pll |= DISPLAY_PLL_DIVIDE_4X;

		pll |= DISPLAY_PLL_2X_CLOCK;

		// TODO: Is this supposed to be DISPLAY_PLL_IGD_POST1_DIVISOR_MASK??
		if (divisors.p1 > 2) {
			pll |= ((divisors.p1 - 2) << DISPLAY_PLL_POST1_DIVISOR_SHIFT)
				& DISPLAY_PLL_POST1_DIVISOR_MASK;
		} else
			pll |= DISPLAY_PLL_POST1_DIVIDE_2;
	}

	// Configure PLL while -keeping- it disabled
	//note: on older chipsets DISPLAY_PLL_NO_VGA_CONTROL probably enables the PLL and locks regs;
	//      on newer chipsets DISPLAY_PLL_ENABLED does this.
	write32(pllControl, pll & ~DISPLAY_PLL_ENABLED & ~DISPLAY_PLL_NO_VGA_CONTROL);
	read32(pllControl);
	spin(150);

	// enable pre-configured PLL (locks PLL settings directly blocking changes in this write even)
	write32(pllControl, pll);
	read32(pllControl);

	// Allow the PLL to warm up.
	spin(150);

	if (gInfo->shared_info->device_type.Generation() >= 6) {
		// SandyBridge has 3 transcoders, but only 2 PLLs. So there is a new
		// register which routes the PLL output to the transcoder that we need
		// to configure
		uint32 pllSel = read32(SNB_DPLL_SEL);
		TRACE("Old PLL selection: 0x%" B_PRIx32 "\n", pllSel);
		uint32 shift = 0;
		uint32 pllIndex = 0;

		// FIXME we assume that pipe A is used with transcoder A, and pipe B
		// with transcoder B, that may not always be the case
		if (fPipeIndex == INTEL_PIPE_A) {
			shift = 0;
			pllIndex = 0;
			TRACE("Route PLL A to transcoder A\n");
		} else if (fPipeIndex == INTEL_PIPE_B) {
			shift = 4;
			pllIndex = 1;
			TRACE("Route PLL B to transcoder B\n");
		} else {
			ERROR("Attempting to configure PLL for unhandled pipe");
			return;
		}

		// Mask out the previous PLL configuration for this transcoder
		pllSel &= ~(0xF << shift);

		// Set up the new configuration for this transcoder and enable it
		pllSel |= (8 | pllIndex) << shift;

		TRACE("New PLL selection: 0x%" B_PRIx32 "\n", pllSel);
		write32(SNB_DPLL_SEL, pllSel);
	}
}

void
Pipe::ConfigureClocksSKL(const skl_wrpll_params& wrpll_params, uint32 pixelClock,
	port_index pllForPort, uint32* pllSel)
{
	CALLED();

	//find our PLL as set by the BIOS
	uint32 portSel = read32(SKL_DPLL_CTRL2);
	*pllSel = 0xff;
	switch (pllForPort) {
	case INTEL_PORT_A:
		*pllSel = (portSel & 0x0006) >> 1;
		break;
	case INTEL_PORT_B:
		*pllSel = (portSel & 0x0030) >> 4;
		break;
	case INTEL_PORT_C:
		*pllSel = (portSel & 0x0180) >> 7;
		break;
	case INTEL_PORT_D:
		*pllSel = (portSel & 0x0c00) >> 10;
		break;
	case INTEL_PORT_E:
		*pllSel = (portSel & 0x6000) >> 13;
		break;
	default:
		TRACE("No port selected!\n");
		return;
	}
	TRACE("PLL selected is %" B_PRIx32 "\n", *pllSel);

	TRACE("Skylake DPLL_CFGCR1 0x%" B_PRIx32 "\n",
		read32(SKL_DPLL1_CFGCR1 + (*pllSel - 1) * 8));
	TRACE("Skylake DPLL_CFGCR2 0x%" B_PRIx32 "\n",
		read32(SKL_DPLL1_CFGCR2 + (*pllSel - 1) * 8));

	// only program PLL's that are in non-DP mode (otherwise the linkspeed sets refresh)
	portSel = read32(SKL_DPLL_CTRL1);
	if ((portSel & (1 << (*pllSel * 6 + 5))) && *pllSel) { // DPLL0 might only know DP mode
		// enable pgm on our PLL in case that's currently disabled
		write32(SKL_DPLL_CTRL1, portSel | (1 << (*pllSel * 6)));

		write32(SKL_DPLL1_CFGCR1 + (*pllSel - 1) * 8,
			1 << 31 |
			wrpll_params.dco_fraction << 9 |
			wrpll_params.dco_integer);
		write32(SKL_DPLL1_CFGCR2 + (*pllSel - 1) * 8,
			 wrpll_params.qdiv_ratio << 8 |
			 wrpll_params.qdiv_mode << 7 |
			 wrpll_params.kdiv << 5 |
			 wrpll_params.pdiv << 2 |
			 wrpll_params.central_freq);
		read32(SKL_DPLL1_CFGCR1 + (*pllSel - 1) * 8);
		read32(SKL_DPLL1_CFGCR2 + (*pllSel - 1) * 8);

		//assuming DPLL0 and 1 are already enabled by the BIOS if in use (LCPLL1,2 regs)

		spin(5);
		if (read32(SKL_DPLL_STATUS) & (1 << (*pllSel * 8))) {
			TRACE("Programmed PLL; PLL is locked\n");
		} else {
			TRACE("Programmed PLL; PLL did not lock\n");
		}
		TRACE("Skylake DPLL_CFGCR1 now: 0x%" B_PRIx32 "\n",
			read32(SKL_DPLL1_CFGCR1 + (*pllSel - 1) * 8));
		TRACE("Skylake DPLL_CFGCR2 now: 0x%" B_PRIx32 "\n",
			read32(SKL_DPLL1_CFGCR2 + (*pllSel - 1) * 8));
	} else {
		TRACE("PLL programming not needed, skipping.\n");
	}

	TRACE("Skylake DPLL_CTRL1: 0x%" B_PRIx32 "\n", read32(SKL_DPLL_CTRL1));
	TRACE("Skylake DPLL_CTRL2: 0x%" B_PRIx32 "\n", read32(SKL_DPLL_CTRL2));
	TRACE("Skylake DPLL_STATUS: 0x%" B_PRIx32 "\n", read32(SKL_DPLL_STATUS));
}

void
Pipe::Enable(bool enable)
{
	CALLED();

	addr_t pipeReg = INTEL_DISPLAY_A_PIPE_CONTROL + fPipeOffset;
	addr_t planeReg = INTEL_DISPLAY_A_CONTROL + fPlaneOffset;

	// Planes always have to operate on an enabled pipe

	if (enable) {
		write32(pipeReg, read32(pipeReg) | INTEL_PIPE_ENABLED);
		wait_for_vblank();
		write32(planeReg, read32(planeReg) | DISPLAY_CONTROL_ENABLED);

		//Enable default display main watermarks
		if (gInfo->shared_info->pch_info == INTEL_PCH_CPT) {
			if (fPipeOffset == 0)
				write32(INTEL_DISPLAY_A_PIPE_WATERMARK, 0x0783818);
			else
				write32(INTEL_DISPLAY_B_PIPE_WATERMARK, 0x0783818);
		}
	} else {
		write32(planeReg, read32(planeReg) & ~DISPLAY_CONTROL_ENABLED);
		wait_for_vblank();
		//Sandy+: when link training is to be done re-enable this line but otherwise don't touch!
		//GMA(Q45): must disable PIPE or DPLL programming fails.
		if (gInfo->shared_info->device_type.Generation() <= 5) {
			write32(pipeReg, read32(pipeReg) & ~INTEL_PIPE_ENABLED);
		}
	}

	// flush the eventually cached PCI bus writes
	read32(INTEL_DISPLAY_A_BASE);
}